|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
WASH HEATER TROUBLE
When checking the voltage betweenthe connector during whites washing. is voltage 220-240V~?
(1)
NO
Replace the MAIN PWB ASSEMBLY
YES
AC 220-240V
YELLOW RED
After power off,is the resistance of wire (RED-YELLOW) connectors between 10 ~30 ?
123
YES
Normal
NO
After power offis thethe heater terminal is disconnected, and resistance 10~30 ?
NO
Replace the HEATER ASSEMBLY
HEATING CONTINUOUSLY ABOVE THE SETTING WATER TEMPERATURE
When pressing Water Temp. during, is the displayed temperature is over 10ûC higher than the selected temp?
Temp.
NO
Check if inlet hose is connected to a hot faucet ; otherwise, replace PWB ASSEMBLY(Main)
YES
Is the resistance between Thermistor Comectors 2.5k½~180k½?
NO
Replace Thermister
YES
When checking THERMISTOR on the tub is the THERMISTOR loosened above 2mm from the rubber?
YES
Push the THERMISTOR tightly to the rubber.
23
|
|
|
> |
|
